Suggestions for making these earrings
- Start by placing the rhinestones in the eye sockets of the skulls. I have used 3 mm stones since the eye sockets of the skulls are not very deep, and the 4 mm stones would probably stick out a bit too much.
- If necessary, you can use a pin to maneuver the stones into their correct position. It might be an idea to apply the glue in this manner, for it allows you to be very precise.
- Allow the glue to dry for several hours.
- Make sure the loops of the eyepin are bent correctly, otherwise the skull will not face forward.
- First, place the bow with a small ring under the skull, and make sure you attach the ear hook as the final step of the process; when I made the earrings myself this turned out to be the most successful method ;)
No comments:
Post a Comment