This blog has moved


Dear readers, we have moved our blog to:

www.beadmixer.co.uk




Monday, 5 August 2013

Neon earstuds with bows


Neon earstuds with bows
It's everywhere you look and enhances your summer mood: I'm talking about neon of course! If a neon shirt or dress is a bit too much for your taste, you can opt for neon accessories, which are striking yet subtle. I have composed a fun tutorial in order for you to make yourself a pair of brightly coloured earrings with cute little bows. Get ready to light up the room with these earrings, because they are ready in three simple steps!
Neon earstuds with bows
What do you need
  • 2 lace edge settings, size 18 x 13 mm
  • 2 cabochons, 18 x 13 mm
  • 2 earstuds with a loop and room for a 5 mm rhinestone
  • 2 earstud clasps (not in photograph)
  • 2 small rhinestones, 5 mm
  • 2 bows
  • 2 open rings, 4 mm
  • Glue and nose pliers
Benodigdheden voor neon oorstekers met strikjes
How do you proceed
Step 1
Start by bending down the upper loop of the setting in order to make it into a pendant. Repeat this action with the second setting. It is important you do this before you put in the cabochon, otherwise it will be hard to bend the loop.
Step 1
Step 2
Afterwards you add a drop of glue to the surface of the setting. I have used Hasulith, but you can use a different type of glue if you wish. Place the cabochon in the setting and gently press the cabochon down. Repeat this action with the second setting and cabochon.
Apply some glue on the settins

Now repeat the same action with the earstud and the small rhinestone. It can be tricky to apply a small drop of glue in the setting of the earstud, but you can always put a bit of glue on a piece of paper and use a small pin (a headpin for example) to gently dab on the glue. Carefully press the rhinestone into the setting of the earstud. Again, repeat the action with the other earstud and rhinestone.
Just to be on the safe side, leave the parts and allow the glue to dry to dry for fifteen minutes.
The jewellery parts after completing step 2
Step 3
It is time for the final step. Take the ring and fold it open by using the nose pliers. Now, it's easiest to attach the earstud on the one side while, simultaneously, adding the setting and bow on the other side. Make sure all the parts are in the right place and are facing the right direction. Now you can use the nose pliers to close the ring.
The backside
Frontside view
Just add the earstud clasps to the back of the earstuds and they are ready to wear! Of course, you can also create your own combination by mixing different colours or even match a neon-coloured cabochon with a pastel-coloured bow!
The three completed earstuds
HBFCVJT638XR


Combinaties

Friday, 26 July 2013

Art Deco earrings with agate drops




Art Deco earrings with agate drops
Very Great Gatsby-esque, these earrings with black agate beads in Art Deco style; the combination of black and silver was very popular in the early 20's Jazz age. Two large, droplet-shaped black agate beads form the base of these earrings. The agates are even in colour and have a nice shine. The silver-coloured bead caps are quite long; I used a headpin of 7 cm for these earrings! The earring hooks are the cherry on top; the fan-shaped ornament above the eyelet completes the Art deco-look of the earrings.


Items

Thursday, 25 July 2013

Bracelets with faceted cabochons

Bracelet with crystal faceted cabochon
This tutorial explains how you can use one simple technique to make many different bracelets. I have used various glass cabochons and combined these with different types of flower cabochons.
What do you need
  • Thongs to connect the separate parts
  • Lace edge settings size 18x13 mm, in a colour of your choosing
  • Faceted glass cabochons size 18x13 mm
  • Flower cabochons size 18x13 mm
  • Rings, size 4 mm
  • Lock
  • Glue
Connect rings to the settings
How do you proceed
  • Open the eyelets at either side of the settings
  • Connect the settings by using the 4 mm rings
  • Place a lock at the end of the bracelet
This is the foundation of your bracelet.
[[file:De basis van de armband is klaar.jpg|autoscale|400px|center|link=|alt=Bracelet foundation]
Before glueing the cabochons into the settings, it might be wise to try out a few different combinations. Once you have determined the colours and the size of the bracelet you can glue the cabochons into the settings by using, for example, Hasulith or E-6000 glue. It might be possible you want to adjust the size of the bracelet. This can be done quite easily by, for example, using a different sized ring at the lock, choosing a different-sized lock, or even by varying the shape and size of the settings you use.
The photoseries below will give you a few examples of the endless possibilities.
Armbandje met kristal facet cabochon
Armbandje met kristal facet cabochon
Armbandje met kristal facet cabochon
Armbandje met kristal facet cabochon
Armbandje met bloem cabochons


Used items

Wednesday, 24 July 2013

Candy jade bling necklace


Candy jade bling necklace
This is a colourful necklace made from a special mix of materials. The round beads are jade in sweet candy colours, the metal bead caps add texture, and the acrylic rhinestones provide the necklace with a nice dose of bling.
This tutorial describes how you can make your own Candy Jade Bling neckclace.
What do you need
  • 1 string of round jade beads 10 mm
  • 14 acrylic pear-shaped rhinestones, size 18x13 mm
  • 14 prong settings for pear-shaped rhinestones 18x13 mm
  • Brass filigree bead caps in a golden colour 10 mm
  • 14 jump rings in a golden colour 4 mm
  • Toggle clasp
  • Crimp beads
  • Coated steal thread (for this necklace I have used grey thread)
  • Some basic beads to finish up the clasp
  • Nose pliers and cutting pliers
Candy Jade Bling necklace components
How to proceed
Step 1 Place the rhinestones inside the prong settings and close them up by using nose pliers.
prong setting nose pliers
Step 2 Attach a 4 mm jump ring to the eyelet of the toggle clasp. The pendants are now ready for stringing.
pendants with acrylic rhinestones
Step 3 String the separate parts in the following order: 1 bead cap, 1 jade bead, 1 bead cap, 1 pendant. Alternate between the different colours of jade beads. Each string of jade beads has a different mix of colours, therefore every necklace will look different in the end.
String the beads, bead caps and pendants
Step 4 Once you have strung all the pendants in between the beads you can use the remaining jade beads and bead caps to add length. I have used the entire string of jade beads, and without a clasp the overall length of the necklace is approximately 43 cm.
Step 5 Now you can finish off the necklace with the toggle clasp. What I did was this: I strung 1 metal 4 mm bead, after that I added 2 crimp beads, after that another 4 mm bead, and finally I added the clasp. Subsequently, bend the tread and string it back trough the the metal beads and the crimp beads, as well as through a couple of jade beads. It might be handy to cut the thread diagonally, so it can be threaded more easily; quite like a needle. Finish this side by pinching the crimp beads.
thread the wire and toggle clasp
Step 6 The other side of the necklace can now be finished with the other end of the clasp. This is the tricky part: if you pull the necklace any tighter at this point the pressure on the beads will become too high, causing the necklace to break. In order to prevent this you will need to have roughly half a centimeter of unbeaded tread. Finish off like you did in step 5: thread 1 metal bead, 2 crimp beads, another metal bead, and finally the other end of the clasp. Again, bend the thread and push it back through the metal beads, the crimp beads, and a couple of the jade beads.
Step 7 Now you can adjust the necklace to make sure the pressure on the beads is not too high. I normally use nose pliers for this purpose. Step by step, genlty pull the thread through the necklace and pull out the excess thread.
Pull excess thread from the necklace
Step 8 Pinch the crimp beads on this side of the necklace by using the nose pliers.
Pinch crimp beads
Step 9 Finish by cutting off the two remaining loose ends of the thread. It is best to cut as close to the bead as possible.
Cut off loose ends
Step 10 Your necklace is finished! Once you have gotten the hang of it you can use this technique to make many different varieties of this necklace: you can opt for beads in the same colour, rhinestones in different colours, or perhaps silver-coloured metal. Good luck!
Candy jade bling beads


Used products